Bulk Dhokra Lost-Wax Brass for Religious & Spiritual

Each Dhokra piece is a one-off lost-wax cast — the clay mold is broken to release the metal — so volume depends on how many separate wax originals the artisan can carve and how many firings the beehive bhatti can run in a cycle. Unit price scales with brass weight, piece size, and the intricacy of the wax model, plus the hand-finishing (de-spruing, chasing, patina work) afterward. Expect higher per-piece costs and higher breakage rates on slim figurative forms like dancing figures or animal decor, where limbs and projections often snap at mold breakout.

Run your fingers over the surface — authentic Dhokra should feel slightly granular where the baked-clay mold left its texture, not plastically smooth like a machined casting. Common defects to reject are blowholes and pinhole porosity (gas trapped during the pour), cold shuts where two streams of molten brass failed to fuse, residual clay or burnt beeswax packed into crevices, and sheared thin elements like figurine arms, jewelry loops, or animal horns broken during mold destruction. Mild variation in the dark patina is normal and expected; powdery or flaking black indicates an under-fired mold that will not hold up.

Dhokra is cast in a traditional brass alloy — primarily copper with zinc, sometimes with a small tin addition to improve fluidity during the lost-wax pour into a cold mold. The characteristic charcoal-to-olive patina is not a lacquer or chemical plating; it is residue from the clay investment that artisans often leave in place for the antique look, though Bankura (West Bengal) clusters more commonly clean and lacquer the surface for a brighter yellow-brass finish. Do not expect chrome-like uniformity — natural oxidation, the broken-mold seam line, and color variation across a batch are intrinsic to the technique.

Yes, but the wax original must be hand-carved or hand-modeled by the artisan before investment molding, so sampling typically takes 2–4 weeks depending on complexity and the artisan's queue. The lost-wax process captures fine engraved and sculptural detail well, but deep undercuts, closed hollow forms, and very thin projections are risky because the clay mold is single-use and destroyed at every pour. Expect piece-to-piece variation even within the same custom order — that is inherent to the technique, not a quality failure, and should be written into your spec sheet.

"Bastar Dhokra" is a registered Geographical Indication from Chhattisgarh, and distinct Dhokra craft clusters operate in Bankura (West Bengal), Jharkhand, and Odisha, each with its own motif vocabulary and finishing tradition. Authentic bulk supply is typically routed through state emporia, craft council channels, or artisan cooperatives tied to the producing cluster, often accompanied by a signed certificate of origin stating the village or artisan group. Ask the exporter which cluster the work is sourced from — the tribal motif language (Kondh, Bastar, Kurmi, etc.) is the most reliable check against machine-cast brass imitations.